Kuzma Stabi S 12inch 90629 - Manual (Page 6)

6
Bearing oil:
From the oil bottle, fill the bearing hole on the T base until the oil reaches the lower mark on
the bottle.
Subplatter:
Lift the aluminium subplatter from the box (fig 4) being careful not to touch the shaft with
any sharp object such as keys, screwdrivers, etc. Remove the protective cover, insert the
pointed part of the shaft into the bearing and manually check for free rotation.
Belt:
Place the belt over the subplatter and over the motor pulley. Check by manual rotation that
the belt runs smoothly in the middle of the motor pulley groove.
Power connection:
Plug into the mains, being aware that there is no mains connection indicator. Press the black
switch and ensure that the belt is running properly.
Platter:
Remove the platter (fig. 5) from its protective bag while keeping the protective cover on the
mat. Place the platter carefully on top of the subplatter. Check again the position of the
motor pulley in relation to the bottom surface of the platter. Remove plastic mat protection.
Press switch again and check that the platter reaches full speed in about 4 seconds.