Kuzma Stabi XL 4 101014 - Manual (Page 4)

4
Unpacking:
Stabi XL 4 comes packed in four boxes. Be aware that the three larger boxes are very heavy.
These boxes have double packaging. Inside are cutouts in the packaging blocks of firm foam
for various parts of the turntable. Some parts are very heavy, so handle with care while lifting
from the boxes and placing them on the assembly surface.
Contents:
Box 1:
Platter and two motor towers
Box 2:
Tonearm tower, base, subplatter, clamp, VTA guage.
Box 3:
Power supply, belts 4x, motor cables 4x, bearing oil bottle 2x, clamp washers 2x, power cord,
Allen keys: 1.5 , 2 , 2.5, 3 mm, motor positioner, instruction manual.
Box 4:
Two motor towers, two motor tower supporting plates.
Basic Setup:
Note: Some parts are very heavy, so be careful when handling!
Note: Choose a suitable supporting table which can hold over 100 kg without warping.
Note: While the parts are packed in plastic bags for protection, these are not intended to be
strong enough to lift or carry the contents.
Open all three boxes and remove top covers.