Kuzma RD ULTRASONIC CLEANER KIT 150217 - Manual (Page 7)

Page | 7
Fig. 2.2. Fixing rod into square tube Fig. 2.3. Frame with 4 rods nearly assembled
Then fit the other end of rods into the second square tube which has a black PVC ring fitted with two
screws on the same side as motor assembly. Secure all 8 screws with moderate force.
Hold the frame in a vertical position and fit one leg using the long large screw and Allen key 3mm. The
screw comes from the side where there are two black bearing blocks. Fit remaining three legs. Fig. 2.4-2.8.
Fig. 2.4. Frame with 4 legs Fig. 2.5. Fixing leg into frame with allen key 3mm
Fig. 2.6. Legs with extension legs Fig. 2.7. Min and max leg's height