Kuzma RD ULTRASONIC CLEANER KIT 150217 - Manual (Page 8)

Page | 8
Fig. 2.8. Legs assembled on frame
Frame height: Fig. 2.7.
Depending on the height of the ultrasonic cleaner, add or remove extension legs to the chart below. Simply
screw them on the top as per Fig. 2.7. Measure height of cleaner from support to the top edge of the bath.
Cleaner height: 265-315 mm leg 250 mm ( remove one extension leg)
305-355 mm leg + 1 extension leg (total length 290 mm)
345-395 mm leg + 2 extension leg (total length 330 mm)
Fine adjust height with feet height adjustment.
Mount motor: Fig. 3.0.
For assembling the motor you will need a medium size Philips screwdrive ( not supplied) using two two
screws already in position on the square tube. Motor housing should be positioned on the outside of the
frame. Fig. 3.0-3.3.
Fig. 3.0. Frame with motor ready for mounting Fig. 3.1. Fix motor on frame