Kuzma RD ULTRASONIC CLEANER KIT 150217 - Manual (Page 9)

Page | 9
Fig. 3.2. Motor assembled Fig. 3.3. Frame assembled
Frame positioning: Fig. 4.0.
Position the main frame over the US cleaner bath in such a way that the motor housing with the switch is at
the back. Be sure that in the process of buying US cleaner the outer size and bath has suggested inner size.
Otherwise the main frame might not fit around the bath.
Fig. 4.0. Frame over US bath Fig. 4.1. Rear of the frame- motor with switch
Adjust the height of supporting legs to reach suggested height ( 50 mm available range) Fig.4.2.. If not high
enough you add extension legs or even ask for different length legs. Between the top edge of frame to the top
edge of bath there should be a height difference of appproximatelly 25- 28 mm. See Fig. 4.4. Fine level
frame to avoid wobbling by readjusting leg height and secure it with black nut.
Fig. 4.2. Adjustable legs Fig.4.3. Level frame with US cleaner bath