LAARS Stor - Installation, Operation and Maintenance Instructions - Manual (Page 6)

6
Important Information continued-
WARNING
Installation is not complete unless a pressure and temperature
relief valve is installed into the side of the water heater. See the
Water Connections section of this manual for details.
This water heater contains very hot water under high pressure.
Do not unscrew any pipe fittings or attempt to disconnect any
components of this water heater without positively assuring the
water is cool and has no pressure. Always wear protective
clothing and equipment when installing, starting up, or servicing
this water heater to prevent scald injuries. Do not rely on the
pressure and temperature gauges to determine the temperature
and pressure of the water heater. This water heater contains
components that become very hot. Do not touch any components
unless they are cool.
Improper installation, adjustments, alteration, service or
maintenance can cause property damage, personal injury or loss
of life. Failure to follow all instructions in the proper order can
cause personal injury or death. Read and understand all
instructions, including all those contained in component
manufacturer’s manuals, which are provided with the appliance
before installing, starting-up, operating, maintaining, or
servicing this appliance. Keep this manual and literature in
legible condition and posted near the appliance for reference by
owner and service technician.
This water heater requires regular maintenance and service to
operate safely. Follow the instructions contained in this manual.
Installation, maintenance, and service must be performed only
by an experienced, skilled, and knowledgeable installer or service
agency.
To comply with NSF requirements this water heater is to be:
a) Sealed to the floor with sealant, in a smooth and easily
cleanable way, or
b) Installed with an optional leg kit that includes legs and/or
extensions that provide a minimum clearance of 6”
beneath the water heater.