Connecting to control, Connecting to extension – LAARS X-BAC BACnet Interface Module - Install and Operating Manual User Manual
Page 4
Advertising
4
X-BAC BACnet Interface Module Installation and Configuration Manual
HT#
059294-00
B
COnneCTIng TO COnTrOL
• The BACnet Interface Module communicates all of its information to the control using RJ45 cable (the cable is provided with the
module).
• Both the BACnet Interface Module and the control have RJ45 sockets.
COnneCTIng TO exTenSIOn
• Unlike the heating control, the extension has a RJ11 Socket. In addition, each extension is packaged with an RJ11 cable to connect
to the control. See "Wiring to Control and Extension" on page 7.
• If an extension is being used, use the RJ11 (RS485) socket on the BACnet module to connect to the extension. See "Item List" on
Advertising