Lake Lite LL-SPL-PAGODA-W-W - Manual

CAUTION: PLEASE KEEP OUR ENVIORNMENT CLEAN! BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY.
Installing Batteries & Cover
PO BOX 414
105 W. Simon St.
Laotto, IN 46763 Phone: 260‐918‐2758
Fax: 260‐918‐3540
E‐mail [email protected]
www.lakelite.com
www.solarpilinglites.com
Mounting Hardware Suggestions – Not Included
Mount Type Hardware Stainless Steel Recommended
No Through Hole Screws x Desired Length
No Through Hole Lag Bolts & Washers x Desired Length
Through Hole Bolts + Nuts + Washers x Desired Length
LiFePo4 Type Battery:
Volts: 3.2v Cell Size: 18500 Capacity: 1000mA
DO NOT USE: standard 1.2v NiMh or NiCd type Rechargeable
batteries or they will be damaged!
Caution! When plugging battery connectors
together, align notches before connecting both
connectors. Failure to do so could result in
permanent damage to the light.
Battery Information
BATTERY MAINTENANCE & STORAGE
For prolonged storage when NOT using or storing the product please follow these procedures.
1. Charge Batteries inside product on sunny day
2. Before Nightfall Disconnect the battery from the product
3. Store Battery and Product in warm/dry location.
4. Note: Batteries can be damaged from sub-zero temperatures when not in use.
5. Note: Batteries will be fully depleted and damaged if not disconnected before long term storage.
SOLAR PAGODA LITE
MODEL: LL-SPL-PAGODA-X