Luma Comfort HCW10B - Manual (Page 6)

6
www.LumaComfort.com
S
ET
U
P
I
NSTRUCTIONS
Carefully remove all packaging materials and retain for future storage/use.
Make sure there is no residual foam left in any of the components. No tools will
be required to assemble this humidifier.
1. Unscrew the nozzle as indicated in figure 1 and remove the water tank
from the base as indicated in figure 2.
2. Remove the water tank cover as indicated in figure 3 and pour water into
the water tank as indicated in figure 4.
3. Place the water tank cover back onto the tank as indicated in figure 5 and
place the entire water tank back into the unit’s base as indicated in figure
6. You should hear the water flowing through the tank. If you do not hear
water flowing through the tank, remove the water tank and replace it back
onto the base.
4. Screw the nozzle back onto the unit.