Luma Comfort HCW10B - Manual (Page 8)

8
www.LumaComfort.com
O
PERATING
I
NSTRUCTIONS
1. Plug the humidifier into the power supply. The unit will now be in standby
mode. All other keys will be invalid except for the power button.
2. Press the power button. The humidifier will detect the water level in the
tank. After 2 seconds, if there is sufficient water in the tank, it will begin to
operate and the indicator light will turn on.
3. The default settings for the humidifier are as follows: medium mist
setting, the timer function will be off, the fan will be on, the unit will be in
cool mist mode and the humidity level will be set to 70%.
M
IST
S
ETTINGS
1. To change the mist mode from cool mist to warm mist, press the C/W
button on the control panel. Once the unit is set to warm mist, the C/W
indicator light will turn from blue (cool mist) to red (warm mist). The
humidifier will then heat the water in the tank. This process can take up to
5 minutes.
2. The mist settings and the timer settings are both controlled by the “+” and
“-“ buttons. To switch from the humidity settings to the timer settings,
press the “S” button to adjust the corresponding settings.
3. Without pressing the “S” button, pressing the “+” and “-“ buttons only will
control the misting output. There are three misting output settings – high,