Fs storage system assembly instructions #3, Malone – Malone MPG331 User Manual
Page 3
Installation & Loading Instructions - FS Storage Rack
TM
MALONE
R
8
. Insert the Top Upright Assembly from Step
8 into the Couplings connected to the lower
assembly created in instructions 2-6.
See image 9.
. Attach the Top Upright Assembly by aligning the top
mounting holes and installing two 45mm Bolts (I),
washers and lock nuts. Firmly tighten all Coupling
bolts on both sides of the frame. See image 10.
. Locate and assemble two Cross Supports (E) with
the two Top Uprights (B) as shown. Use nuts and
washers provided. Firmly tighten. See image 8.
NOTE: The Cross Support with the MALONE logo
should be in the top (highest) position.
10
9
11
. Install Foam Blocks and Upright Pads where
applicable. See Page 4 for a listing of all
rack systems and the correct components
included with each system. See image 11.