Clarion SR6000 - Manual (Page 30)

27 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
disarming
To disarm the security system, press . You will hear two
chirps, and the parking lights will flash twice. If the power locks
are controlled by the system, the doors will also unlock. The
siren chirping either four or five times when disarming indicates
Tamper Alert, which is described in the Diagnostics Section of
this guide.
disarming while driving
Press on the remote or simply turn off the ignition to
disarm the system. The lights will flash twice, the doors will
unlock, the siren will chirp twice, and the status LED will turn
off. The 2-way remote will beep twice (or vibrate). The disarm
icon (29) will be displayed on the LCD.
high security disarm
This security system offers High Security Disarm. High Security
Disarm is a feature that makes it possible to silence and reset the
system while it is triggering, without disarming the system. If the
system is triggered and the siren has been sounding for longer
than six seconds, pressing on the remote will stop the
trigger and return the unit to the armed state. The system will
not disarm, but rather reset. This prevents you from disabling
the system should you wish to disarm it without visually
checking the vehicle. Pressing after resetting the system will
disarm the system; pressing this button during the first six
➜
➜
➜