Clarion SR6000 - Manual (Page 38)

35 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
Then press to advance the minute selection or to
reverse the minute selection. Once the correct time is displayed
simply stop pressing any buttons for 15 seconds and the trans-
ceiver will automatically exit the clock mode.
temperature check mode
This system will report the interior temperature of your vehicle
with the press of three buttons. To activate the temperature
display press
, and simultaneously and then
release. You will hear a melody and the interior temperature will
appear on the LCD screen for five seconds.
timer mode
By pressing the remote and buttons the parking
lights will flash 4 times and then start the vehicle and run for the
set duration. The remote start can be shut off by the remote by
pressing the remote start button and remain in timer
mode, but if any other shut down zones or the ignition becomes
active the timer mode will cancel.
1. Press Timer mode buttons.
2. The vehicle will confirm with 4 parking light flashes.
3. A 1-second delay will start.
➜
note: If the ignition is on, the temperature check will not
work.
➜