Vertical Communications DXP Plus - Manual (Page 11)

Making Calls
3.1 Making Calls
NOTE: The following procedures assume your telephone is
programmed for prime intercom (intercom dial tone when you
pick up the handset). If your telephone is programmed for
prime line (outside line dial tone when you pick up the
handset), press INTERCOM to select an intercom path.
• To make a call,
1. Lift handset and listen for intercom dial tone.
2. Select line by dialing line group access code:
9 = group 1,
80 through 89 = groups 2 through 11,
60 through 64 = groups 12 through 16.
3. Listen for outside dial tone.
3. Dial number.
• To dial a personal or system speed dial number,
1. Lift handset and listen for intercom dial tone.
2. Press TAP.
3. Dial desired code:
1–0 = personal speed dial number.
✳ 000–✳ 999 = system speed dial number.
NOTE: Earlier systems are limited to speed dial codes ✳ 100–✳ 599.
• To redial the last number you dialed at your telephone,
1. Lift handset and listen for intercom dial tone.
2. Press TAP and dial #.
3
GCA70–251 Making Calls
Single Line Telephone Station User's Guide 3 – 1