Vertical Communications DXP Plus - Manual (Page 29)

Sending And Receiving
Non-Verbal Messages
8.1 Lighting The Message-Waiting Light
• To turn on the message-waiting light (and a broken dial tone)
at an idle telephone,
1. Lift handset and listen for intercom dial tone.
2. Dial ✳ 3.
3. Dial extension number of station to be alerted. The
message-waiting light of called station will flash. The
message-waiting light can only be turned off by either the
person sending the message or the person receiving the
message.
• To turn off the message-waiting light at a busy or idle station,
1. Lift handset and listen for intercom dial tone.
2. Dial # 3.
3. Dial extension number of station that was alerted. The
message-waiting light of called station will turn off.
• To turn off the message-waiting light at a station during a
conversation with a party at that station,
1. Press INTERCOM.
NOTE: The message waiting light can only be turned off by the person
sending the message or the person receiving the message.
8
GCA70–251 Sending And Receiving Non-Verbal Messages
Single Line Telephone Station User's Guide 8 – 1