5 using the tracker paging system – Vertical Communications DXP Plus User Manual

Page 25

Advertising
background image

To cancel call forwarding,

1. Lift handset and listen for intercom dial tone.

2. Dial # 5.

NOTE: For each call you receive during call forward, you will hear a

short tone burst to remind you calls are being forwarded.

7.5

Using The Tracker Paging System

The Tracker Pager System option allows you to send call back and
parked call messages to Tracker pagers assigned to station numbers.
Along with the parked call message, the system parks the call in orbit
for retrieval by the paged party. The type of message that the system
delivers (either alphanumeric or numeric-only) depends on the Tracker
pager model in use at the station.
When outside callers call into a system that has both Tracker Paging
and voice mail options installed, the system can be configured to give
these callers the option of either leaving a message or tracking the
person they are calling.
If you have a Tracker pager assigned to your personal intercom number,
you can receive messages that someone else sends you. The system
automatically installs the Tracker pager for your use; however, you can
disable it when you do not wish to receive paged messages and when
you leave at the end of your day. Of course, if you do disable your
Tracker pager at the end of your day, be sure to enable it at the
beginning of your next day.

To track a called party after receiving a ring-no answer,

1. Dial ✳ 8.

2. Hear confirmation beep (Tracker page accepted) or hear busy

tone (Tracker page not accepted).

4. Hang up handset.

GCA70–251

Using The Other Telephone Features

Single Line Station User's Guide 7 – 3

Advertising
This manual is related to the following products:

FX