6 ultrasonic sensor installation, 1 bracket assembly – NORAC UC5-BC-RG06 User Manual
Page 16
Advertising
13
6 Ultrasonic Sensor Installation
6.1 Bracket Assembly
Assemble the breakaway sensor bracket as illustrated in Figure 5, following the instructions
below.
Figure 5: Breakaway Bracket Assembly
1. Compress the spring and insert it together with the collar into the base.
2. Slide the tube through the assembled part.
3. Using the bolt and nut, tighten the collar to the tube with the sensor tube centered.
4. Apply a small amount of grease to the rotating surfaces of the bracket.
Advertising
This manual is related to the following products: