Clarity Amplified Big Button Corded Phone with Digital Answering Machine E814 - Manual (Page 17)

17
using your e814
store a number into a memory key
1. In idle mode, enter the telephone number you want to store.
2. Press and hold any memory key for more than 2 seconds, until you hear the
confirmation tone to indicate the number has been stored.
note:
If there is already a number stored before, the old number will be replaced directly.
Dial the number in a memory key
In idle mode, press <m1>/ <m2>/ <m3>/ <m4>/ <m5>, the phone will auto-
matically dial out the telephone number stored in the selected memory key in
speakerphone mode.
emergency Call without main power
The E814 corded base unit can make an emergency call with the corded handset when
the mains AC power is disconnected.
Pick up the corded handset and wait for several seconds to get the dial tone and then
enter the phone number to make a call.
remarks:
It is not possible to dial numbers from memories when the mains power is off.
When the mains power is off, you can also answer an incoming call with the
corded handset.
When the phone rings, pick up the corded handset to talk to the caller.
redial
You can redial up to 10 of the last numbers called. If you have stored a name in the
directory to go with the number, the name will be displayed instead.
redial a number from the redial list
1. In idle mode, press <rd/P> to view the redial list.
2. Press <UP/down> to browse the redial list.
3. Pick up the corded handset or press <sPeaKerPhone> to dial to the selected
redial number.
note: If there are no numbers in the redial list, the display will show “EMPTY”.