Clarity Amplified Big Button Corded Phone with Digital Answering Machine E814 - Manual (Page 18)

18
using your e814
store a redial number into the directory
1. Follow steps 1 and 2 in section Redial a number from the redial list.
2. Press <oK/menU> twice.
3. Edit the number, then press <oK/menU>.
4. Enter the name; edit, then press <oK/menU>to save; display shows “saved”,
then returns to Redial list.
Delete a redial number
1. Follow steps 1 and 2 in section Redial a number from the redial list.
2. Press < X > to delete; number will be deleted immediately.
Find the handset (With optional cordless handset(s), purchased separately)
You can locate the handset by operation on the base station as below.
1. In idle mode, press <PaGe/fLash> to page all handsets; “PAGING” will flash on
the base screen.
All handsets registered to the base will produce the paging tone and “PAGING”
flashes on the screen. You can stop the paging by pressing <taLK> / <sPeaKer-
Phone> on any handset or <PaGe/fLash> on the base to stop paging.
make an internal Call
This feature allows you to make internal calls and make conference calls.
intercom (With optional cordless handset(s), purchased separately)
Using the corded base:
1. In idle mode, press <int> and the number of the registered handset you wish to
call; press “<int> 9” to call all cordless handsets.
2. The called handset rings, showing “base is calling” Press <taLK> on the called
handset to establish the internal call.
note:
If only one cordless handset (Optional purchase) is registered to the base station,
press <int> will call the cordless handset immediately.