Craftsman 137.21807 - Manual (Page 13)

12 13 12 13
cord, or turn the switch ON until
the missing or damaged part is
obtained and is installed correctly.
Call 1-800-843-1682 for missing or
damaged parts.
NOTE: To make assembly easier, keep
contents of box together. Apply a coat
of automobile wax to the table. Wipe all
parts thoroughly with a clean dry cloth.
This will reduce friction when pushing
the workpeice.
Separate all parts from packing
materials. Check each part with the
illustration on the next page and the
“Table of Loose Parts” to make certain
all items are accounted for, before
discarding any packing material.
If any part is missing or damaged,
do not attempt to assemble the
table saw, plug in the power
TABLE OF LOOSE PARTS
ITEM DESCRIPTION QUANTITY
A Table saw assembly 1
B Blade guard assembly 1
C Anti-kickback pawls assembly 1
D Handwheel handle 1
E Riving knife hardware bag assembly 1
F Rip fence 1
G Miter gauge 1
H Blade wrench 2
I Push stick 1
J Push stick storage holder 1
K Rear table extension 1
L Rear table extension tube 2
M Table insert 1
N Table extension wing hardware bag assembly 1
O Hex wrench 1
P Blade 1
Q Left and right extension table 1 each
R Dust bag 1
S Extension table hardware bag assembly 1
T AAA Battery 2
STAND
U Locking lever hardware bag assembly 1
V Stand hardware bag assembly 1
W Leg bracket 4
X Bottom long support bracket 2
Y Top long support bracket 2
Z Bottom support bracket for roller wheel 1
AA Bottom short support bracket 1
BB Top short support bracket 2
CC Roller wheel hardware bag assembly 1
WARNING

!
CARTON CONTENTS