Т³гж 14 – OmniSistem Beta 3 – EC-2600U User Manual
Page 14
|< >|
12
9.4 Using of the software
When you finish the installation , run the controlling software and it will display the following page:
1). Display of status: Device ID. Program ID, Serial Port,
2). Indication of communication between this facility and computer: It displays OK normal communication, or
ERROR for unmoral,
3). By different colors to identify the 13th curve of frequency response,
4). Device list, 2 times press No. of the device , then being ready to connect, and display the following interface:
5). Input channels IN1, IN2 and output channels OUT-A, B ,C D,E,F indication of electric level,
6). Indicate the currently adjustable output channels( *marks) and connection status among all channels , one time
press this area,
7). Parameters' adjustable areas, different parameters to different adjustable methods/types,
DIGITAL SPEAKER PROCESSOR
[ Before connect, there have two option: Download data from PC to DEVICE---Indicate that download data have
configed in computer, But only load into RAM. If to save datas, you should process the save operation(in Program
menu); Upload data from DEVICE to PC indicate that load the current program using in device into PC to review or edit ]
If online, press this device then show the "Disconnect with this device" information to process offline command.
4
3
5
6
7
1
13
12
11
15
14
8
9-10
2