Т³гж 16 – OmniSistem Beta 3 – EC-2600U User Manual
Page 16
|< >|
14
Recall Lock: Prohibit/ Permit to transfer the program via the panel key, if set
rohibit
,you can not see the
program on the Panel ,and even can not transfer the program..
If choosing
Program Restore
order :
Delete: the program protected will not be deleted
Recall: Press the
Recall
order, will implement the operation of Transferring Program, and set the choosing
program as the current using program.
Stop List: Stop List Order only will be used in implementing List Program.
Refresh: Refresh Order only will be used in after List Program ending.
Save the current program to program number designated, if choosing the New Program ,and automatically use the
new program number ,which is not being used, or otherwise save to program number designated. You may press
Modify
to revise the program name and program information , and enter the contents in the Program Name
column and Program Information Column respectively , after finishing, please press
Modify Confirm
to save.
DIGITAL SPEAKER PROCESSOR