Casablanca Fan Company Casablanca 19th Century - Manual (Page 11)

10
LIGHT KIT WIRING
WIRE NUT
NOTE: If you do not desire to install the
light kit, see “Optional Switch Housing Cup”
installation instructions on Page 11.
Step 15. Remove the wire nuts on the BLACK
and WHITE wires from the fan. If necessary re-
move the insulation from the last
1 /
2
” of each
wire (fan and light fixture).
Step 16. Attach the switch housing wires to
the light fixture wires by placing the bare ends
of the wires together and then securing with a
wire nut. Connect in this order:
• WHITE wire from fan to WHITE wire from
light fixture. Secure with wire nut.
• BLACK wire from fan to BLACK wire from
light fixture. Secure with wire nut.
Inspect each wire nut and ensure that no bare
wire is visible; pull on each wire to test the
connection is mechanically sound.
INSTALL LIGHT KIT
Step 17. Slide the light kit over the
threaded pipe from the switch housing.
Assure that no wires are pinched.
Secure the light kit to the fan with the
finial.
Tighten securely by hand only.
FINIAL
THREADED
PIPE
WIRE
NUT