Casablanca Fan Company Casablanca 19th Century - Manual (Page 7)

6
Step 2. Route the outlet box wires through the 1 / 2
″
diam-
eter outer hole of the canopy adaptor plate. Attach the
crossbar and canopy adaptor plate to outlet box with screws
provided.
Step 3. With the large washer attached, pass the lag screw
through the center hole of canopy adaptor plate and screw
into guide hole. Tighten until outlet box is firmly mounted
to beam. This box must be firmly secured to the ceiling. We
recommend that the ceiling fixture outlet box be of suffi-
cient capacity enabling it to support the weight of fan and
light fixture under any conditions.
LAG
SCREW
LAG SCREW INSTALLATION
1 / 2
″
DIAMETER
OUTER HOLE
LARGE
WASHER
CANOPY INSTALLATION
CANOPY HARDWARE
CANOPY CANOPY
HATCH
CANOPY LOCK WASHER (4)
CANOPY SCREW (4)
Step 4. Attach the canopy to the crossbar mounting bracket behind the
installed outlet adaptor plate with three of the 8-32 x 2
1 /
2
″
long canopy
screws and lock washers provided with your Casablanca fan. Hand tighten
until snug against the ceiling.
CANOPY
SCREW
CANOPY
LOCK
WASHER
FEED OUTLET BOX
WIRES THROUGH
CANOPY OPENING
Note: On sloped ceilings, align the
canopy opening toward the top or peak
of the room.