Clarion DXZ525 - Manual (Page 14)

18
DXZ525
English
5. Turn the [ROTARY] knob clockwise or coun-
terclockwise to set the correct time.
∗
The clock is displayed in 12-hour format.
6. Press the [ s ] button to store the time into
memory.
7. Press the [A-M] button to return to the previ-
ous mode.
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the
car’s battery or take out this unit, the clock is re-
set. While setting the clock, if another button or
operation is selected, the clock set mode is can-
celed.
Turning the screen saver function
on or off
This unit is provided with the screen saver func-
tion. You can turn on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗
The factory default setting is “ON”.
1. Press and hold the [A-M] button for 1 second
or longer to switch to the adjustment selec-
tion display.
2. Press the [ a ] or [ d ] button and select
“AUTO SS”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select “ON” or “OFF”.
4. Press the [A-M] button to return to the previ-
ous mode.
∗
The following illustration presents one of the
patterns which are shown when the screen
saver function is turned on.
Triggered audio mute for cellular
telepones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular tele-
phone rings in the car.
∗
This function is not compatible wiht all cellular
telepones Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
Operations Common to Each Mode