Clarion DXZ525 - Manual (Page 9)

DXZ525
13
English
Basic Operations
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes in the following order:
● When “B BOOST” is set
“B BOOST” ➜ “BAL 0” ➜ “FAD 0” ➜ “LOUD
OFF” ➜ Last function mode.
● When “IMPACT” is set
“IMPACT” ➜ “BAL 0” ➜ “FAD 0” ➜ “LOUD
OFF” ➜ Last function mode.
● When “EXCITE” is set
“EXCITE” ➜ “BAL 0” ➜ “FAD 0” ➜ “LOUD
OFF” ➜ Last function mode.
● When “CUSTOM” is set
“BASS” ➜ “TREB” ➜ “BAL 0” ➜ “FAD 0” ➜
“LOUD OFF” ➜ Last function mode.
● When “Z+ OFF” is set
“BAL 0” ➜ “FAD 0” ➜ “LOUD OFF” ➜ Last
function mode.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “BASS”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗
The factory default setting is “B<G 0>”. (Ad-
justment range: –6 to +6)
3. Press the [ d ] or [ a ] button to select “B<F
60>”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗
The factory default setting is “B<F 60>”.(Ad-
justment 60/100/200 Hz)
4. Press the [ d ] or [ a ] button to select “B<Q 1>”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
∗
The factory default setting is “B<Q 1>”.(Ad-
justment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “TREB”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗
The factory default setting is “T<G 0>”. (Ad-
justment range: –6 to +6)
3. Press the [ d ] or [ a ] button to select “T<F
10>”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗
The factory default setting is “T<F 10>”.(Ad-
justment 10 kHz/15 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [A-M] button and select “BAL”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
∗
The factory default setting is “BAL 0”. (Adjust-
ment range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [A-M] button and select “FAD”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
∗
The factory default setting is “FAD 0”. (Adjust-
ment range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.