Country Home Products Garden Cart - Manual (Page 15)

CALL TOLL FREE 1-866-NEUTON1 11
Hardware
All hardware comes in colored bags: blue, green, clear, and red. You need each bag for a different step
when assembling your Cart. Only open the bags when you need to use them. Below are drawings of the
hardware (not drawn to scale) together with their quantities, and the steps where you use them.
Following that is a table that describes the contents of each bag.
Tie Wrap (3 each)
Step 8
Contents of Colored Hardware Bags
Bag Color Step Description Hardware Quantity
Blue 2 Attach the buckets 1/4" x 1/2" Screw 6
1/4" Lock Washer 4
1/4" Small Flat Washer 4 Green 3 Attach the drive train
1/4" x 1-1/2" Screw 4
1/4" Lock Washer 4
1/4" Large Flat Washer 4 Clear 4 Attach the caster wheel
1/4" x 1" Screw 4
1/4" Small Flat Washer 2
1/4" x 1-1/2" Screw 2 5 Attach the upper handle
1/4" Nylon Lock Nut 2
1/4" Small Flat Washer 4
1/4" x 1-3/4" Screw 4 6 Attach the controls caddy
1/4" Nylon Lock Nut 4
Red
8 Secure the wire harness Tie Wraps 3
All of the screws you need to assemble the NEUTON Garden Cart have a diameter of 1/4"; only the
lengths vary. This is good to know if somehow the screws get jumbled while you are assembling your
Cart. If this happens, simply get out a ruler and measure the length of the screw and you’ll know what
size you are working with.
1/4" x 1-3/4" (4 each)
Step 6
1/4" x 1-1/2" (6 each)
Steps 3 and 5
1/4" x 1" (4 each)
Step 4
1/4" x 1/2" (6 each)
Step 2
1/4" Lock Washer (8 each)
Steps 3 and 4
1/4" Small Flat Washer (14 each)
Steps 3, 5 and 6
1/4" Large Flat Washer (4 each)
Step 4
1/4" Nylon Lock Nut (6 each)
Steps 5 and 6