Casablanca Fan Company Victorian Ceiling Fan 63XXT - Manual (Page 6)

6
BLADE SCREw
(4 per blaDe)
Step 8. Badge Style
Attach the blades to the blade
holders by first pressing the
blade badge into the blade, then
installing the blade holder using
the four blade screws provided for
each blade.
Hand tighten securely.
BADGE STYLE BLADE HOLDER & BLADE
Install the assembled blade and
blade holder to the flywheel
(round holes) or direct drive
motor.
Hand tighten securely.
Repeat for each assembly.
BADgE STyLE
blaDe holDer
BLADE
blaDe holDer screW
(2 per blaDe holDer)
BLADE
BADgE
BLADE HOLDERS & HARDWARE
BADgE STyLE
BADgE
BLADE SCREw
(4 per blaDe)
blaDe holDer screW
(2 per blaDe)
Your fan is equipped with a flywheel
that allows for both 4 and 5 blade in-
stallation. The screw holes surrounded
by squares are for 4 blade installation,
while the screw holes in circles are for
5 blade installation as shown above.