Concord Camera 5330z User Manual
Page 125
125
1
1 Rotate the function dial to "SETUP" and slide the power
switch to turn on the camera.
• The power switch returns to the initial position.
• The setup mode menu is displayed on the LCD monitor.
SWITCHING THE VIDEO SIGNAL FROM THE VIDEO OUTPUT TERMINAL
As this camera has the video-out terminal, you can watch the captured images on TV by connecting
this camera to your TV with the supplied video cable.
The video output signal can be switched between NTSC and PAL.
What is an NTSC system and a PAL system?
Both are the color television broadcast system. The NTSC system is mainly used in U.S.A., Japan, Canada,
Mexico, the Philippines, Korea, etc. The PAL system is used in the western Europe such as Germany, England,
Switzerland, Netherlands, Italy (except for France) and Australia, Singapore, Thailand, China, etc.
As these systems have no compatibility, you cannot watch the NTSC system based TV in the area where a PAL
system is used.
This camera can switch the video output signal to both an NTSC system and a PAL system. So you can watch the
images on TV not only in your country, but in other areas.
2
2 Press the or key so that [VIDEO OUT] is highlighted
and press the key.