Watching the captured images on tv – Concord Camera 5330z User Manual
Page 150
150
WATCHING THE CAPTURED IMAGES ON TV
WATCHING THE CAPTURED IMAGES ON TV
By connecting this camera to your TV with the supplied video cable, you can watch the captured
images on TV.
1.Confirm that the video out signal from the video-out terminal is set to NTSC or
PAL according to the color system in your country. ( see page 125 ).
2.Turn off the power of the this camera and TV.
3.Open the terminal cover on the left side of the camera and connect the mini
plug of the supplied video cable to the video-out terminal of the camera.
• The LCD monitor is turned off.
4.Connect the other side of the video cable to the video input terminal on TV.
5.Turn on the power of TV.
6.Rotate the function dial to
7.Slide the power switch to turn on the camera.
8.Switch the video input of TV according to the terminal to which the video
cable is connected.
• The images recorded in the CF card can be displayed both on the LCD monitor and TV.
9.You can watch the images in the various play modes following the procedure .
• The images can be played back in the slide show mode ( see page 82 ) , etc.