Concord Camera 5330z - Manual (Page 29)

29
INSERTING/REMOVING THE COMPACT FLASH(CF) CARD
Be sure to turn off the power of the camera when inserting or removing the CF card into or from
the camera. Otherwise, the data in the card may be lost or the card may be damaged.
If you insert or remove the CF card when the camera is turned on, re-format the CF card after trans-
ferring the data from the card to your computer if the data is safe.
INSERTING THE CF CARD
1 1 Open the card-slot door as shown in the figure.
2 2 Insert the CF card into the card slot.
• Position the front of the card towards the camera lens and insert the card
with the signal part facing down until the card stops.
• Insert the card straight. Do not insert it on the angle.
• If the card is stopped halfway, check the direction of the card. Forcing the
card into the slot may damage the card or the camera.