Cleveland Range KCL-25-T - Manual (Page 8)

5
6
8
5
4
3
2
1
7
OPERATING INSTRUCTIONS
ITEM # DESCRIPTION FUNCTION
1. Tilt Wheel (tilting models only) Used for tilting the kettle.
2. Vacuum/Pressure Gauge Indicate steam pressure in PSI inside steam jacket as well as
vacuum in inches of mercury.
3. Pressure Relief Valve This valve is used to vent the kettle and in the unlikely event there is
an excess steam build-up in the jacket, this valve opens
automatically to relieve this pressure.
4. Low Water Indicator Light (Red) When lit, indicates that the kettle is low on water and will not operate
in this condition (see RESERVOIR FILL PROCEDURES on page #24).
5. On-Off Switch/ Turns kettle ON/OFF and allows the operator to adjust the kettle
Solid State Temperature temperature in increments from 1 (Min.) to 10 (Max.).
Control (see TEMPERATURE RANGE CHART on page #6).
6. Heat Indicator Light (Green) When lit, indicates that the kettle's burner is on.
Cycles ON-OFF with burner.
7. Water Level Sight Glass Displays water level in steam jacket.
8. Ignition Failure Indicator Light Indicates failure of heating system to ignite.
(Amber)
9. Tangent Draw-Off Valve Used for draining product or wash water from kettle. It is supplied as
standard equipment on stationary kettles and is optional on tilting kettles.
General Parts Drawing