Coleman 5040-761 - Manual (Page 4)

4
Assembly
■ Identify Center Rear Support Bracket. It has six holes, various sizes.
■ Place Center Rear Support
Bracket in place over the center
screw.
■ Assemble one nut loosely over
the screw to attach the Center
Rear Support Bracket.
■ Turn unit over and assemble
large screw loosely through Cover
Pieces into base of Center Rear
Support Bracket.
■ Attach Post Base to Cylinder
Cover Pieces loosely with seven
Large Screws.
7 Required
Large Screw
1 Required
Large Screw
1 Required
Large Screw
■ Assemble three small screws
loosely through Cover Pieces into
Center Rear Support Bracket.
■ Attach one large screw loosely
at base of Side Support Bracket.
■ Attach a Side Support Bracket
loosely with Hex Nut at top.
Step 3 Step 2
1 Req’d
Hex Nut
1 Req’d
Hex Nut
3 Req’d
Small Screw
Step 1 (continued) Step 2 (continued)