Coleman 5040-761 - Manual (Page 8)

8
Step 16
Assembly
continued.
• You must provide propane gas and propane tank. Use a standard 20 lb.
propane tank only.
• Use this heater only with a propane vapor withdrawal supply system. See
Chapter 5 of the
Standard for Storage and Handling of Liquefied
Petroleum Gas, ANSI/NFPA 58. Your local library or fire department will
have this book.
• A minimum supply pressure of 11.0 W.C. is required for the purpose of
input adjustment for propane gas.
• The pressure regulator and hose assembly supplied with the appliance
must be used.
• The installation must conform with local codes, or in the absence of local
codes, with National Fuel Gas Code, ANSI Z223.1.
• A dented, rusted or damaged propane tank may be hazardous and should
be checked by your tank supplier. Never use a propane tank with a dam-
aged valve connection.
• The propane tank must be constructed and marked in accordance with
the specifications for LP gas cylinders of the U.S. Department of
Transportation (DOT).
• Never connect an unregulated propane tank to the heater.
Standard 20 lb. tank
■ Screw regulator onto hose. Do not cross-thread.
■ Tighten Securely. ■ Install tank.
■ Attach regulator to tank. ■ Complete attachment.
■ Install tank.