Compaq Presario 3000 Series - Manual (Page 51)

Configuration 4-5
Table 4-1
Configuration Parameters/LED Indicators
continued
Parameter
(LED)
Parameter
Name
LED 16
Status
Explanation
7 Shutdown
Delay
On
(default)
Enables a 5-second delay before turning
off power to the output receptacles after
receiving a shutdown command from the
host.
Off Enables a 3-minute delay.
8 AC Input Failure On
(default)
Enables an audio alarm when the utility
voltage is outside the UPS operating range.
Off Disables the audio alarm for this event.
9 Sleep Mode On Enables Sleep mode.
Off
(default)
Disables Sleep mode.
11-14 Reserved Reserved for future use.
15 Reset Defaults On Defaults are restored 2 .
Off Configuration selected by the user
overrides defaults.
Notes: 1 Only one nominal utility voltage can be configured.
2 If model R3000j voltage defaults to 120, change the voltage to 100.
If model R3000h-NA voltage defaults to 230, change the voltage to 208.