Coway CHP-03AR - Manual (Page 14)

INSTALLATION PRECAUTIONS
Please check before use!
This product is for 120 V~ 60 Hz only .
Please connect the power plug to a dedicated grounded electrical
outlet for 120 V~ 60 Hz. The water filtration device works normally
only when the electricity is connected.
• Open the main water supply valve.
The main water must be supplied to operate the water filtration device normally.
• After installing the product
Get rid of the saved water above the full water in the inner water tank 2 times or more to use.
• When the indicator in the indication part is turned off
When the indicator in the indication part is turned off, check if the power supply was stopped
due to the power failure or other cause.
• Regularly filter replacement
It is important to replace the filter regularly to drink the pure water. If the filter is overused
beyond its service life, the performance of the water filtration device deteriorate, Do not miss the
filter replacement cycle.
• When you didn’t use for a long time
If you saved the water for a long time or you didn’t use, drain the water inside of the water
filtration device completely and remove the newly filtered water one time to use.
• When you don’t want to use for a long time
Close the main water supply valve and unplug.
• Draining hot water
Slide the draining cover at the front of the product off and connect the draining hose
(continuous extraction hose) to drain the hot water in the hot water tank.
(Take care not to burn yourself when draining the hot water.)
When you don’t use for a long time, close the main water supply valve and unplug.
Tips
13