phil&teds columbus - Manual (Page 5)

YES-Correct
Always check that the shoulder straps are at the correct height for your child.
The child’s shoulders should always be below the slot for the harness.
Firstly, release the strap holding the backrest cover on to gain access to the
harness. Slide one of the harness straps off the harness connector.
Then from the front of the seat, pull it through the slot in the seat’s backrest and
fabric cover. Thread the harness strap back through the next hole up or down on
the seat’s backrest.
Re-thread the harness strap back onto the harness connector at the back of the
seat.
Repeat the same process for the other harness strap. Make sure both of the
straps go through slots at the same height.
3
CORRECT SHOULDER STRAP HEIGHT
CHANGING THE SHOULDER STRAP HEIGHT
NO-Too high NO-Too low
Gr. 15kg+
Gr.9kg+