phil&teds columbus - Manual (Page 6)

REMOVING ALL STRAPS
Release the strap at the bottom of the backrest cover to gain access to the
harness.
Slide both of the harness straps off the harness connector at the back of the
backrest and pull the webbing through the slots in the seat’s backrest and fabric
cover.
Turn the webbing retainers on their narrowest end and feed them through the
slots in the base of the seat and then through the slots in the fabric cover.
REMOVING THE SAFETY HARNESS LAP STRAPS
REMOVING THE SAFETY HARNESS SHOULDER STRAPS
4