phil&teds tott v1 User Manual
Page 4
fastening the harness:
Slot the two metal sections of the buckle connectors together. Insert the two buckle connectors into the
slot in the top of the buckle until they “click” into place. Always check that the harness is correctly locked
by pulling the shoulder straps upwards.
tightening the harness:
To tighten the harness, pull down on the adjustment strap until the harness is the correct tightness. (The
harness should be adjusted as tightly as possible without causing discomfort to the child. A loose harness
is dangerous and should be checked each time that you use the seat).
slackening the harness:
The harness is loosened by pulling on both straps at the same time as pressing down on the harness
adjuster located on the shell underneath the “Press” word stitched on the cover.
unfastening the harness:
To release the harness, push the red button in the middle of the harness buckle. You can now lift your
child from the seat; ensure that the buckle connectors do not catch on clothing.
removing the crotch strap and safety harness lap straps: