PRG Super Node - Manual (Page 16)

14 SUPER NODE™ USER MANUAL
GENERAL OPERATION
Operating Modes Overview
The Super Node operates in one of two modes: Vx76 or Series 400. The mode will depend on what protocol it is
receiving on its Console In Port.
+ Vx76 Mode - In this mode, the unit will accept Vx76 protocol and generate both Art-Net/sACN and DMX512
outputs.
+ Series 400 Mode - In this mode, the unit will accept Art-Net protocol and convert it to DMX512. (When used with
the Series 400 rack, the Node will follow the selected A, B, or C system.)
Reset
In the event a software reset is necessary, press the reset button located between ports 4 and 5.
(The button can be pressed using a small instrument.)
Figure 6: Reset Button
SUPER NODE
[ Vx76 Mode ]
Vx76
Protocol
Art-Net/sACN and DMX512
SUPER NODE
[ S400 Mode ]
Art-Net
Protocol
DMX512
Reset Button