Specifications, Technical specifications – PRG Super Node User Manual
Page 22
20
SUPER NODE™ USER MANUAL
SPECIFICATIONS
Technical Specifications
POWER REQUIREMENT:
100 to 240 VAC, 47 to 63 Hz, 0.5A, 60W max.
COOLING:
Forced air with ultra-quiet chassis fan and CPU cooler.
OPERATING TEMP:
-20°C to 50°C (-4°F to 122°F).
INPUT:
One control signal input which is fed from a console providing either Vx76 or DMX-over-
Ethernet (Art-Net) protocol.
One male XLR connector for DMX input (rear panel).
One USB port for factory setup and configuration.
OUTPUT:
One DMX-over-Ethernet (Art-Net) output carrying up to sixteen DMX512-A universes.
Eight (non-isolated) standard DMX512-A serial outputs, each carrying one DMX512-A
universe. (Both output protocols are simultaneously active.)
POWER THRU:
Additional loads may be connected up to 10A total input current.
BACKUP BATTERY:
Panasonic CR2032 3V Lithium Coin.
COMM INDICATORS:
LEDs indicating Link and Activity data for all Ethernet outputs, and DMX and RDM status
for each DMX port.
CONTROL:
Built-in Menu Display touchscreen.
HOUSING:
Standard 2U 19" rack-mount chassis, 11" deep.
WEIGHT:
6.5 lbs. (2.9 kg)
COMPLIANCE:
ETL & cETL approvals, CE Marked.