PRG Super Node - Manual (Page 19)

SUPER NODE™ USER MANUAL 17
Series 400 Mode
When the Super Node has been loaded with Series 400
software, the menu system will provide "Series 400" screens
which can be used to set up and monitor an Art-Net system.
Vx76 Node (Address)
+ Indicates the node address as a number.
Status
+ S400: Indicates that the node is in Series 400 Mode.
+ System (x): Displays the currently active Series 400
system.
IN (In Port)
+ For future use.
Out Ports (1-8)
+ Displays one button per physical port. (8 total.)
+ Buttons show the assigned universe (in the chosen display
format).
+ If no universe is assigned, the button shows only the port
number.
+ If the assigned universe is not being received, the universe
value changes from White to Black.
Status Bar
A status bar is provided at the top of every sub
screen. The bar provides the following
information:
Node ID
+ Node (x): Node address number.
+ S400: Node is in Series 400 Mode.
Node Status
+ Provides the same status as the status button on the main screen (e.g. Online, Download, etc.).
Screen Title
+ Title of the current screen (e.g. Settings, Network, Monitor, etc.).