Proheat T-II - Manual (Page 13)

11
STEP 6 Press “
W” or “X” to set “ON” time.
STEP 7 Press “Day” repeatedly to set day(s).
STEP 8 Release “Timer”. (Green LED and “T2” will
remain lit to indicate active T2 program.)
STEP 9 Press “Timer” once more to activate both
“T1” & “T2”. (“T1” and “T2” will remain lit to
indicate active “T1” and “T2” program.)
You can toggle through to activate or deactivate
the T1, T2 and T1 + T2 Timers by repeatedly
pressing “Timer”.
Timer will repeat each set day until switched off.
Example School bus Timer: T1 is set at 6:00 a.m. Mon.
through Fri. T2 is set at 2:00 p.m. Mon. through
Fri. The heater will switch on each weekday
morning at 6 a.m. and run for 1 or 3 hours (see
page 4 Timer Run Mode settings) then switch off.
The heater will again switch on at 2 p.m. each
weekday afternoon and run for 1 or 3 hours
(see page 4 Timer Run Mode settings) then
switch off. This will automatically repeat every
weekday until the Timer is switched off.
T-II
NOTICE