Proheat T-II - Manual (Page 19)

17
Dual Timer, Multiple Day Mode
STEP 1 Press “Timer” repeatedly to toggle through and
activate T1, T2 and T1 + T2 Timers. (Green Timer
LED will go on). The Heater will switch on at the
set program(s) time and run for 1 or 3 hours
(see page 4 Timer Run Mode settings) then
switch off. The Timer will then automatically
repeat each set program until switched off.
STEP 2 Press “Timer” repeatedly to toggle through and
deactivate and cancel the current set program(s)
(Green Timer LED will go out). T1, T2 and T1 +
T2 Timers. (Green Timer LED will go off).
If the heater has been turned on by the “T1
or T2 Timer” in dual timer mode, pressing
“Manual” will turn the heater off but leaves
the Timer(s) activated. Pressing “Timer” will
turn off the heater and de-activate the
Timer(s). If Lockout Mode is ENABLED, only
the “Manual” button will work.
NOTICE See page 4 for optional Timer Mode settings.
To activate or deactivate Timer programs Dip
switch #4 Lockout Mode must be DISABLED.
See page 4 for Lockout Mode settings.