Proheat T-II - Manual (Page 16)

14
To enter Manual Mode Runtime settings
Lockout Mode must be DISABLED. See page
4 for Lockout Mode settings.
Step 2 Release the Clock and Timer buttons.
Step 3 Use the “
W” or “X” to set the desired
maximum runtime in half hour increments
from 0.5 hours to 9.5 hours.
Example P1:05 = 0.5 hours.
P1:10 = 1.0 hours.
....
P1:95 = 9.5 hours.
P1:00 = infi nite (no maximum) Factory Setting.
With this setting the heater will operate
indefi nitely until it is switched off.
Step 4 Press the Clock & Timer buttons simultaneously
to exit Manual Mode Runtime Settings.
NOTICE