Canon WEBVIEW LIVESCOPE 3.2 - Manual (Page 48)

48
Procedure
Adding a relay server to the list
Choose Relay Server List from the View
menu. When the relay server list appears,
click Add.
Enter each item and click OK. The relay
server is added to the list.
1
2
■ Relay Name
Any name can be given to the relay server being registered.
■ Host Name
Specify the IP address of the relay server.
■ Port No.
Specify the Port numbers of each camera server. The port numbers are the values
that were set on the camera server.
■ Set the camera using the relay server
If the relay server is to be used in connections established by selecting a camera
site, you can specify the camera site that can be connected via a registered relay
server.
Registering in the Relay Server List