PYRAMIDA KH 60 Rustico v.2 - Manual (Page 33)

33
The works on maintenance should be performed on
cooking hood with the purpose of maximal performance and
effectiveness of its operation during the life time.
The cooking hood should be discon-
nected from the power network at
works connected to the maintenance
on cooking hood.
Regularly perform following actions at maintenance:
- Regularly remove all food debris and fat from the lower
surface of the cooking hood and from aluminum fat
filters. An excessive fatness can lead to fire!
- Wipe the external surfaces of the cooking hood with the
humid, good squeezed flannel tissue.
- Use special fluids creating the protective film for handling
the surfaces made of stainless steel.
- Do not use the abrasive agents and solvents.
- Verify the conditions of the air duct of cooking hood and
ventilation channel, clean them at necessity!
Carbon filters can be purchased in retail
outlets or authorized service centers.
PRODUCT MAINTENANCE
In the extractor fan lighting lamps of type Е14 are used,
their power is not more that 40 W. Replacement of lamps is
made in the following order:
- Make sure that cooking hood is disconnected from power
network before lamps replacement; wait until lamps will
cool down.
- press the filter lock and take off the fat filter;
- Unscrew an old lamp from the holder and screw the new
one;
- press the filter lock and install the fat filter into the cooking
hood.
BACKLIGHTS REPLACEMENT
E14 40Вт