Ram Trucks 2014 ProMaster Commercial - User Guide - Manual (Page 42)

Voice Command (VR) User TIPs
• To hear available commands, press the Uconnect ® Voice Command button and
say “Help.” You hear available commands for the menu displayed.
• At any time, you can say the words “Cancel” or “Help.” These commands are
universal and can be used from virtually any menu. All other specific commands
can be used depending upon the active application.
• You can interrupt the system prompts at any time by pressing the Uconnect ® Voice
Command button while the system is speaking. After the beep, you can say a
command.
• You can ‘chain’ commands together for faster results. Say “Call Joe Doe mobile,”
for example.
• For best performance, adjust the rearview mirror to provide at least ½ inch (1 cm)
gap between the overhead console (if equipped) and the mirror. This creates an
unobstructed path to the microphone on the overhead console.
• Always wait for the beep before speaking.
• Speak normally, without pausing, just as you would speak to a person sitting a few
feet/meters away from you.
• Ensure that no one other than you is speaking during a Voice Command period.
Steering Wheel Buttons
• You can control many of your radio features using your voice. Press either the VR
or Phone Pick Up button on your steering wheel.
Types of Voice
Commands
Available
Steering Wheel
Buttons to
Press:
Radio Mode Media Mode Phone Mode
Uconnect ®
Voice Com-
mand (VR)
Button
AM/FM &
Satellite Band
Control
Media Devices
Control
-
GENERAL
Uconnect ®
Phone Button
- -
Call Initiation,
Call Manage-
ment, Pre-
formatted Voice
Text Reply
ELECTRONICS
40