RED ROCKET BREAKOUT BOX - Manual (Page 12)

© RED.COM, INC. 2009 DECEMBER 22, 2009
2-4
2.3 POWER LED
When power is connected to the RED Rocket Breakout Box, the Power LED provides information about
the status of the device (refer to 2.1 OVERVIEW OF THE FRONT):
Table 2-3: RED Rocket Breakout Box Power LED Operation
Power LED Status Explanation
Illuminated
RED Rocket Breakout Box is properly con-
nected and operating properly
Blinking Slowly
(1 sec. intervals)
The major cable (DVI A/B to DVI A) is not
connected to the RED Rocket Breakout Box
and/or the RED Rocket board. Refer to sec-
tion 3.1 SETUP OF RED ROCKET BREA-
KOUT BOX.
Blinking Fast
An internal error has occurred. A firmware
update may solve this issue.
Please contact RED support at
http://www.RED.com/support .