Reliable EP1000 - Manual (Page 10)

08
(least abrasive) and carefully work your way up to the brass, then the stainless steel
brush (optional). It is always better to use care when using the brushes to prevent dam-
age or scratching.
The use of the steam nozzle alone is particularly good for cleaning and degreasing
many working surfaces, ventilation hoods, see through oven doors, ventilation grating,
kitchen furniture, stainless steel or enamel sinks, hand-basins, bath-tubs, water taps
(to remove scale and water residue), doors, metal frames, car wheel rims, pet areas etc.
The nylon brush, because of its softness, is ideal for removing the dirt in grout, sinks
and other surfaces where you need some light scrubbing action, but need to be careful
not to scratch the surface.
Tougher cleaning jobs may require the use of the brass brush that is supplied. Please
make sure you are careful that it does not scratch the surface with this tool. Brass is
tougher than nylon, but softer than stainless steel. For surfaces (grout for example)
where the dirt is not being properly lifted with the nylon brush, carefully using the brass
brush may give the best results.
For the toughest cleaning assignments (very caked on grease, rust, barbeque grills,
very dirty grout), we recommend that you purchase the optional stainless steel brush
that is available through your dealer.
When using the steam nozzle with or without the brushes, you will need a cloth to wipe
up the moisture and dirt that has been lifted through cleaning.
AluMINuM NOZZlE
This is a super high pressure tool (23), with a long aluminum (extremely hot) pipe. This
tool provides a higher pressure and a hotter steam jet than any other nozzle. Its proper-
ties make this tool very suitable for cleaning stubborn dirt that do not require brushes.
ATTACHMENT COuPlINgS
If the attachment connections dry up after intensive use, put a small amount of lubri-
cant (Vaseline) around the O-rings on the male attachment.
FIllINg THE TANK
If on the main panel (2), the water level control light (B) comes on during use and you
would like to continue using the steam cleaner, you will need to follow these steps:
1. Unscrew the black water tank cap (4)
2. Fill the tank with water (see water instructions for details).
3. Place the tank cap (4) back on.
If you're using the trolley with the external water bottle conncted to the water tank cap,
follow the same steps listed above but directed to the water bottle.